Home   About Us   Mobile Booster   Mobile Jammer   FAQs   Contact Us

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Mobile Booster :

The goal of a cell phone signal booster is to take an existing cell signal, typically found outside your home, office or vehicle, amplify the signal and then broadcast it to an area which has weak or no signal. A cell phone signal booster system consists of an external antenna, a signal boosting amplifier and an internal antenna, with cable connecting all of the components.

1. Capabilities of a Signal Booster

  • Cell phone signal boosters are designed to take an existing signal, amplify it, and broadcast to a space that is receiving weak or no signal. In order for the system to work, there must be an existing, stable signal to receive and amplify. Cell phone signal boosters are not able to create signal, they only amplify and transmit cell phone signal, so if you are not able to place an external antenna in a location that has a stable signal, then a cell phone signal booster will not work for you.

2. Coverage Area

  • Signal Plus organizes cell phone signal booster kits by the square footage that they are able to cover in ideal circumstances. An ideal circumstance is defined as having a very strong signal for the external antenna, the internal antenna is placed in the best location possible, and there are no major obstacles to prevent the signal from being transmitted to the entire space that needs coverage.

3. DUAL BAND BOOSTER

Key Features-

  1. Small Size, Light Weight, Beautiful Repeater
  2. Low Operating Temperature
  3. High-Gain Linear Power
  4. Ultra-Low Noise Receiver
  5. Full-Duplex Communication Mode
  6. Up to 65-70 dB Gain, Suitable For Office Enterprise Or Warehouse Or Home Use
  7. Power Supply INPUT: 100-240V 50/60Hz 1.0A, OUTPUT: DC6V, 2.5A Max.

Specifications:

Mobile Signal dual system signal repeater series are designed for business places indoor coverage solution. Such as the bookstore, the restaurant, the coffee shop, the KTV, the bar, the parking pot, the super market, big office... And the area is between 100-100sq ft. Mobile Signal dual system improves indoor cell phone signals by capturing and repeating the outside signals, bringing them into the building and enhancing them.

Electrical specification Uplink Downlink
Frequency Range Customized upon request
Max .Gain ≥ 65dB ≥ 70dB
Max .Output Power ≥ 15dBm ≥ 20dBm
Band width (-3dB) Wide Band
MGC ( Step Attenuation ) ≥ 31dB / 1dB step
Automatic Level Control ≥ 15dB,auto shut off after 15dB
Gain Flatness ≤6dB(P-P)
Noise Figure ≤6dB
VSWR ≤2.0
Group Delay ≤0.5μs
Power LED Green light when power on.
I /O Port N-Female
Impedance 50 ohm
Operating Temperature -25ºC~+55ºC
Environment Conditions IP40
Dimensions 250x220x52mm
Weight ≤ 3.2Kg
Power Supply Input AC90~264V,output DC10V / 3A

Product Feature:

  1. Provide quick coverage solutions for weak signal and dead zones
  2. Compact size, low consumption of electricity ,easy installation, great cover.
  3. High linear design , low interference with outside frequency.
  4. Automatic gain control function.

Description:

A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use. The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones.

4. Outside Antennas
  • There are two different types of external antennas that you'll encounter when deciding on a cell phone signal booster, omni-directional and yagi (directional).
    Omni-directional antennas are designed to send and receive signal in all directions, so you're able to reach multiple cell phone towers at the same time and boost cell phone signal for multiple providers. If you have a moderate to strong signal in the area that you're going to be placing your external antenna, then an omni antenna is good for you.
5. Inside Antennas
  • There are two different types of inside antennas to choose from when selecting the components for your signal booster system: dome and panel antennas.
    Panel antennas are designed to broadcast and receive signal in one specific direction, and are best suited for either long, rectangular spaces or multiple floors in a house or building. They can be mounted on the wall facing down a space or mounted facing downwards at the top of a space and broadcast down and out through multiple floors.
    Dome antennas are designed to cover one floor with signal in all directions and are meant to be mounted on the ceiling the center of the space in order to broadcast and receive signal equally in all directions. They should not be used for multiple floors of coverage.
6. Cable Types
    Cable is used in all systems to connect the antennas to the signal boosters. Unfortunately, cables are not perfect and will lose some signal depending on the type, quality, and length of the cable. Ultra Low Loss LMR-400 cable looses 2dB over 50 ft while standard RG6 coax cable (like you use for cable television) loses 5 dB of 50 ft. When possible, you should use the shortest and highest quality cable possible to ensure that a maximum amount of signal is getting from the antennas to the signal booster. If you have extra cable, it is possible to cut it and add a connector to the new end, but this may require special tools. In generally, always try to buy the correct length of cable while allowing a little extra just in case.

INTRODUCING THE LATEST IN CELLULAR BOOSTER TECHNOLOGY.

1) Singal Band 900 Mhz Booster

Features

  • Work on All 900MHz Network operator
  • Coverage up to 100- 1000 sq ft.
  • Easy operation and Installation Process Support Multi User and Network Operator
  • Immediately improves voice and data signal quality Receives and transmits better than your cell phone
  • Upgradable for multiple rooms
  • Suitable for houses, offices, Building, Basement or More

Technical Specification

Characteristic
Specification
Down-Link Up-Link
Frequency Range 935--960MHz 890--915MHz
Input Power Range -70 ~ -40 dBm / FA(1.23MHz)
Output Power 17dBm 17dBm
Gain 55dB 50 Db
Characteristic Impedance 50  
VSWR <1.4  
Tx/Rx Isolation > 80dB  
Noise figure < 3dB  
Group Delay < 1us  
Pass Band Ripple 3.0dB p-p  
Main power AC 100-220V (used AC/DC 9Vdc)
Built-over area 100m*m  
Size(H×W×D) 195 x105 x 30 mm

2) Singal Band 1800 Mhz Booster

Features

  • Work on All 1800MHz Network operator
  • Coverage up to 300-350 Sq. meters
  • Easy operation and Installation Process
  • Support Multi User and Network Operator
  • Immediately improves voice and data signal quality
  • Receives and transmits better than your cell phone
  • Upgradable for multiple rooms Suitable for houses, offices, Building, Basement or More

Technical Specification

Characteristic
Specification
Down-Link Up-Link
Frequency Range 1805--1880MHz 1710--1785MHz
Input Power Range -70 ~ -40 dBm / FA(1.23MHz)
Output Power 20dBm 20dBm
Gain 55dB 50 Db
Characteristic Impedance 50  
VSWR <1.4  
Tx/Rx Isolation > 80dB  
Noise figure < 3dB  
Group Delay < 1us  
Pass Band Ripple 3.0dB p-p  
Main power AC 100-220V (used AC/DC 9Vdc)
Built-over area 300m*m  
Size(H×W×D) 200 x120 x 22 mm

3) Double Band Booster

1.booster

  1. Dual Band signal booster is 850MHz and 1900MHz
  2. CE,FCC
  3. gain:55dB

Key features:

  1. Small Size, Light Weight, Beautiful Repeater
  2. Low Operating Temperature
  3. High-Gain Linear Power
  4. Ultra-Low Noise Receiver
  5. Full-Duplex Communication Mode
  6. Up to 55dB Gain, Suitable For Office Enterprise Or Warehouse Or Home Use
  7. Power Supply INPUT: 100-240V 50/60Hz 1.0A, OUTPUT: DC6V, 2.5A Max. LPS - US Universal AC Plugs

Compatible Carries:

This Repeater Works with 850/1900MHz for the following Service Provider: Sprint, T-Mobile, Alltel, AT&T, Verizon, Metro PCS, U.S. Cellular, Bell Mobility, Cellular One, Cellular South, Rogers Wireless, which operating on the frequency of 850MHz Cellular and 1900MHz PCS System.

Model HW8050
Specification Uplink Downlink
Frequency Range 824-849MHz/1850-1910MHz 869-89MHz/1930-1990Mhz
Standard Supported CDMA,WCDMA,GSM,EDGE,TDMA, and AMPS etc.
Max. Gain (db) Gp > 50 Gp > 55
I/O Port N-Female on both ends
Impedance 50
Opearating Temperature -25~55C
Power Supply AC100~240V 50/60Hz 1A; DC 6V/2.5A
Dimensions 135x105x30(mm) or 5.3 X 4.1 X 1.2 (inches)
Weight 0.45 kg

Notice:

This Dual Band Repeater kit is designed for 850MHz Cellular Band and 1900MHz PCS Band in US and Canada; it includes everything you need to enhance cell phone signal coverage in your location – including cables, indoor and outdoor antennas and all hardware for installation.

Application:

This product is designed to boost multiple users with maximum power, is High end residential, cost effective solution for small business application with weak outside signal, it is best used in the following applications:

1. Office Enterprise or Warehouse
2. Remote Locations, including Rangers
3. Home or Apartment Use

Package Includes:

  1. 1 x 55dB Dual Band Repeater
  2. 1 x 10dBi Gain Outdoor Panel Antenna
  3. 1 x 3dBi Gain Indoor Ceiling Antenna
  4. 1 x 5 Meters Low-loss Coaxial Cable for connecting indoor Antenna
  5. 1 x 10 Meters Low-loss Coaxial Cable for connecting outdoor Antenna
  6. 1 x AC Adapter
  7. 4 x Screws for Mounting
  8. 1 x English User Manual

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Home | About Us | Mobile Booster | Mobile Jammer | FAQs | Contact Us
copyright © 2010 Signal Plus